Call us at: 888-336-7864
Email us at: sale@bioennopower.com
Cart 0
Bioenno Power Renewable Power Pack (BPP-M300)

Bioenno Power Renewable Power Pack (BPP-M300)

$349.99

The Bioenno Power 300 Watt Hour Power Pack, Model BPP-M300, is a versatile, compact, power pack based on advanced Li-ion battery technology which can last for more than 1000 charge/discharge cycles or 5+ years (compared to lead acid batteries which only last a few hundred cycles)!  Use for powering various portable electronics including cell phones, tablets, laptop computers, ham radio equipment, CPAP machines, among other equipment anywhere at any time. Every aspect was crafted to provide the best performance from an integrated 110VAC, DC-to-AC inverter to the integrated Solar Controller. The unit also includes a variety of DC outputs using market standard plugs, which can be used for powering cell phones and tablet computers. The unit is rugged and durable and is backed by a 5 year warranty.


BPP M300 Power Pack User Manual 

 

BPP-M300 Power Pack Specifications
General Specifications:
Unit Capacity: 300 Watt Hours
AC Maximum Continuous Discharge:  400 Watts
AC Maximum Peak Discharge: 800 Watts
AC Static Current Draw: 5 Watts on Standby
110V AC Charge Time: 5-6 Hours
Maximum Solar Charge Current: 50 Watts at 18V
Maximum System Operation Temperature: 32°F ~ 113°F (0°C ~ 45°C)
Dimensions: 12.4 in. x 4.9 in. x 6.5 in. (313.5 mm. x 124.0 mm. x 164.8 mm.)
Weight: 7.5 lbs. (3.4 kg.) 

 

DC Output: 
2X 12V 2.1mm x 5.5mm Coaxial Socket, 12V 3A Maximum Discharge (13.8V with Ham Radio voltage booster)
2X 5V USB Socket, 2.1A Maximum Discharge
2x 5V USB Socket, 1.1A Maximum Discharge

 

AC Output: 
2X 110VAC Three Prong Socket, 400 Watt

 

Operations:
  • Powering ON: Press “AC ON/OFF” switch to the left of the LED Light. When unit has powered on, the master power switch will glow blue. The display will turn on and display capacity, charge status and the AC/DC output icon will show. This icon is represented by the symbol of a battery in a circle.
  • Discharging*: After powering on, AC and DC can be used for discharge; LED display will indicate remaining capacity left on battery.
  • LED Light ON: Press “LED” switch to the right of the LED and hold for 3 Seconds or until LED light engages.
  • LED Light OFF: Press “LED” switch to the right of the LED and hold for 3 Seconds or until LED light disengages.
  • Charging: Insert selected charge cable appropriate to charge method into correct port, unit will begin charging automatically and the “AC/Solar” icon will show. This icon is represented by the symbol of a plug in a circle.
  • Long Term Storage: For long term storage, please recharge every 3 months. Keep unit away from high heat and/or high humidity sources, wet environments and direct sunlight as doing so may damage your unit.

*For Ham Radio customers, this unit is suited for low power radios only, to use attach DC-DC converter to 2.1mm x 5.5mm Coaxial Socket, first and then attach radio to PP45 Powerpole output.

 

Error Codes, Faults and Remedies:  

ERROR CODE

FAULT/PROTECTION TRIPPED

REMEDY

01

SYSTEM OVER TEMPERATURE

CHECK AMBIENT TEMPERATURE AND COOL DOWN UNIT, STANDARD OPERATION WILL RESUME AFTER TEMPERATURE HAS DROPED BELOW 113°F OR 45°C

02

BATTERY OVER VOLTAGE

DISCONNECT ALL LOAD(S) FROM UNIT AND ATTACH UNIT DIRECTLY TO 110V AC CHARGE SOURCE TO RESET BATTERY, UNIT VOLTAGE LIMIT IS NOT EXCEEDED

03

BATTERY DAMAGE

UNIT’S BATTERY HAS SUFFERED DAMAGE, PLEASE CONTACT BIOENNO POWER FOR REPAIR/REPLACEMENT

04

INVERTER OVER CURRENT

DISCONNECT LOAD(S) FROM AC OUTPUT, CONFIRM LOAD(S) DO NOT EXCEED UNIT MAXIMUM OUTPUT AND CHECK FOR SHORT CIRCUITS IN LOAD(S)/CONNECTIONS

05

INVERTER OVER LOAD

DISCONNECT LOAD(S) FROM AC OUTPUT, CONFIRM LOAD(S) DO NOT EXCEED UNIT MAXIMUM OUTPUT

06

CHARGING OVER VOLTAGE

DISCONNECT CHARGE SOURCE, CONFIRM CHARGE SOURCE DOES NOT EXCEED MAXIMUM INPUT VOLTAGE

07

12V OVER CURRENT

DISCONNECT LOAD(S) ATTACHED TO COAXIAL PORT(S), CONFIRM LOAD(S) DO NOT EXCEED UNIT MAXIMUM OUTPUT

08

USB 5V OVER CURRENT

DISCONNECT LOAD(S) ATTACHED TO USB PORT(S), CONFIRM LOAD(S) DO NOT EXCEED UNIT MAXIMUM OUTPUT

09

INVERTER SHORT CIRCUIT

DISCONNECT LOAD(S) FROM AC OUTPUT, CONFIRM LOAD(S) DO NOT EXCEED UNIT MAXIMUM OUTPUT OR CHECK FOR SHORT CIRCUITS IN LOAD(S)/CONNECTIONS

 

Policy 
Shipping: Standard
Return/Exchange: 30 Days
Warranty: 5 Years


    Share this Product


    More from this collection

    Back to the top